Blue zr coloring stain or liquid?

Discussion in 'Digital Materials and Machine Tools' started by pjd_cdt, Oct 6, 2017.

  1. pjd_cdt

    pjd_cdt Member

    I need to make a sky blue full zirconia molar crown, can anybody do this for me or direct me to where I can get a blue green state coloring liquid?
    Thanks
     
    pjd_cdt, Oct 6, 2017
    #1
  2. Mr 3d

    Mr 3d Sheriff Staff Member

    Cobalt powder

    Or any Blue Porcelain stain will be made from Cobalt.

    Done it a few times for fun

    perfect melting temp (1500C) for the sintering furnace and OK to use as a Dental stain!

    Need to get it to a super fine powder! It will melt into the zirconia. (and tray)

    Eventually it will melt through the tray and into the chamber floor!
     
    Mr 3d, Oct 6, 2017
    #2
  3. cadfan

    cadfan Moderator Staff Member

    Not sure how it comes out pure only used it partially on cusps

    Schirmfoto_2017-10-06_051839.jpg
     
    cadfan, Oct 6, 2017
    #3
  4. DMC

    DMC Scott Hudson

    I have made a royal dark blue crown.

    It is easy. Cobalt...as I said above.

    No need to guess
     
    DMC, Oct 6, 2017
    #4
  5. DMC

    DMC Scott Hudson

    Cobalt...

    These pieces have gone into sintering furnace multiple times.

    Alumina tray and a crappy home-made cover or just a random chunk of insulation.

    Started with Cobalt dust....Porcelain stains.

    . DSC_0442.JPG
     
    DMC, Oct 6, 2017
    #5
  6. DMC

    DMC Scott Hudson

    DSC_0441.JPG I cant find my Zirconia that I made.
    First time I did this was 2010

    Then again recently.
     
    DMC, Oct 6, 2017
    #6
  7. Robert Squire

    Robert Squire Active Member

    Any ideas on who to make a green zirconia crown?
     
    Robert Squire, Oct 27, 2020
    #7

Share This Page